Blog

How to record an online course on a Mac

A laptop showing a grid of course lessons with a graduation cap, lamp and microphone
Fifty lessons that look like they were recorded on the same afternoon.

Recording an online course is a different job from recording one video. You're making 30 or 50 of them, over weeks, and they have to look and sound like they were made on the same afternoon. The plan: keep lessons short, lock your setup so nothing drifts between sessions, record in batches of three or four, and check your platform's rules before you record lesson one, not after lesson forty.

Keep each lesson short

The number everyone quotes comes from a 2014 study of edX courses by Guo, Kim and Rubin, based on 6.9 million video views: engagement dropped off after about six minutes. Read it carefully, though. It measured how long people kept watching, not how much they learned, and UC San Diego's guidance warns the six-minute figure gets overread. Its own advice: ideally under 12 minutes, never over 20.

A practical rule: one concept per lesson. If a lesson needs "and also," it's two lessons. Short lessons are also cheaper to fix. When a tool changes its UI next year, you re-record one six-minute video, not a 40-minute monster.

Lock your setup so every lesson matches

Students notice when lesson 12 sounds different from lesson 11. Make everything that can drift fixed:

  • Mic position. Mark where the mic and your chair go with a piece of tape. A few centimetres closer or further changes how you sound.
  • Light. Window light changes every hour. Close the blinds and use a lamp you can set the same every time.
  • Camera framing. Same height, same distance. Take a screenshot of your framing to match against next session.
  • Clothes. Wear the same thing for every lesson in a batch, or a few identical tops for the whole course.
  • Screen. Same display resolution, browser zoom, editor theme and font size in every lesson.
  • Recorder settings. Background, frame, cursor, webcam size and position. Save them once instead of rebuilding them from memory.

Script or outline?

Both work, for different lessons:

  • Full script for intros, concept explanations and anything you'll say to camera. You get it right in fewer takes, and the wording is consistent across the course. Read it from a prompter placed right under the camera, so your eyes stay on the lens. More on why in this post about built-in teleprompters.
  • Bullet outline for hands-on screen demos. Reading a script while also clicking through software sounds stiff. Talk through it naturally from a few bullets.

Record in batches of three or four

Every time you sit down, you spend 10 to 15 minutes getting set up: positioning, testing levels, checking the light. Batching spreads that cost over several lessons. Go too long, though, and your energy drops, and viewers can hear it. Ruzuku's batch-recording guide puts it at three or four lessons per session, with breaks in between, or five or six if each lesson is under five minutes.

  • Don't stop on a mistake. Pause, take a breath, and say the sentence again. Cut the bad version out later. Stopping and restarting breaks your rhythm.
  • Do a 10-second test first every session. Play it back with headphones before you record a whole lesson with the mic muted.
  • Name files as you go. "03-02-setting-up-the-project" beats "Recording 47" when you have 50 of them.

Check your platform's rules first

Udemy is the strictest of the big platforms. Its quality checklist asks for:

RequirementUdemy minimum
Total videoAt least 30 minutes
LecturesAt least 5
ResolutionHD, 720p or higher (1080p is the better target)
AudioPlays through both channels, stays in sync with the video

Udemy has also offered a free test-video review, where its team gives feedback on one sample before you upload the course. If it's still available, use it before you record forty lessons. Check Udemy's video standards for the current wording. Teachable, Kajabi and Thinkific are far less strict and take ordinary MP4 files.

Fix audio that only plays in one ear

The "both channels" rule catches a lot of people. Many USB mics are mono, and depending on the setup, the voice ends up in the left channel only. Students in headphones hear you in one ear. To check a file (needs ffmpeg, brew install ffmpeg), measure each channel:

ffmpeg -i lesson.mp4 -af "pan=mono|c0=c1,volumedetect" -f null - 2>&1 | grep mean_volume

If the right channel (c1) reads around −90 dB, it's silent. This copies the left channel to both sides without re-encoding the video:

ffmpeg -i lesson.mp4 -c:v copy -af "pan=stereo|c0=c0|c1=c0" -c:a aac -b:a 192k lesson-fixed.mp4

I tested it on a file with a silent right channel. Before: left −21.1 dB, right −91 dB. After: −21.1 dB on both.

Add captions

Captions help students who are deaf or hard of hearing, students watching in a second language, and anyone watching on mute. Automatic transcription gets most of a lesson right and trips over names, jargon and acronyms, so read through it before publishing. If your platform accepts caption files, upload an .srt rather than burning the text into the picture. Students can then turn it off.

The tools, honestly

You can record a whole course with QuickTime and edit it in iMovie. OBS is free too, and its scenes and profiles help with consistency.

I make CursorFlow, a Mac screen recorder. For a course, these are the features that matter:

  • Presets. Save the background, frame, cursor, camera layout, zoom feel and audio levels once. Every new lesson opens already styled, so lesson 40 matches lesson 1.
  • A teleprompter that's invisible to the recording, for scripted sections.
  • Separate tracks for screen, webcam, mic and system audio, so a too-loud app sound doesn't mean re-recording your voice.
  • A webcam bubble you can move and reshape in different parts of a lesson: big for the intro, small in a corner during the demo.
  • On-device captions exported as .srt or burned in.

It's free to use, with a watermark on exports until you buy the one-time licence. If you're publishing lessons on YouTube too, see recording a YouTube tutorial on Mac.

Frequently asked questions

What are Udemy's video requirements?
Udemy's quality checklist asks for at least 30 minutes of video, at least 5 lectures, HD at 720p or higher, and audio that plays through both channels and stays in sync.
How long should online course videos be?
One concept per lesson. A study of 6.9 million edX video views found engagement dropped after about six minutes; UC San Diego recommends under 12 minutes and never over 20.
How many course lessons should I record in one session?
Three or four, or five or six if each lesson is under five minutes. Fewer wastes setup time; more and your energy drops in a way viewers can hear.
Why does my course audio only play in one ear?
Many USB mics are mono and end up recorded to the left channel only. Copy the left channel to both sides with ffmpeg: -af "pan=stereo|c0=c0|c1=c0".
Should I script my course lessons?
Script intros and explanations you say to camera, and read them from a prompter under the camera. Use a short outline for hands-on screen demos so you sound natural.